Surface structure of thin asymmetric PS-b-PMMA diblock copolymers investigated by atomic force microscopy

Asymmetric poly(styrene-b-methyl methacrylate) (PS-b-PMMA) diblock copolymers of molecular weight M-n = 29,700g mol(-1) (M-PS = 9300 g mol(-1) M-PMMA = 20,100 g mol(-1), PD = 1.15, chi(PS) = 0.323, chi(PMMA) = 0.677) and M-n = 63,900 g mol(-1) (M-PS = 50,500 g mol(-1), M-PMMA = 13,400 g mol(-1), PD = 1.18, chi(PS) = 0.790, chi(PMMA) = 0.210) were prepared via reversible addition-fragmentation chain transfer (RAFT) polymerization. Atomic force microscopy (AFM) was used to investigate the surface structure of thin films, prepared by spin-coating the diblock copolymers on a silicon substrate. We show that the nanostructure of the diblock copolymer depends on the molecular weight and volume fraction of the diblock copolymers. We observed a perpendicular lamellar structure for the high molar mass sample and a hexagonal-packed cylindrical patterning for the lower molar mass one. Small-angle X-ray scattering investigation of these samples without annealing did not reveal any ordered structure. Annealing of PS-b-PMMA samples at 160 degrees C for 24 h led to a change in surface structure

T Cell Responses during Acute Respiratory Virus Infection

This article is made available for unrestricted research re-use and secondary analysis in any form or by any means with acknowledgement of the original source. These permissions are granted for the duration of the World Health Organization (WHO) declaration of COVID-19 as a global pandemic.The T cell response is an integral and essential part of the host immune response to acute virus infection. Each viral pathogen has unique, frequently nuanced, aspects to its replication, which affects the host response and as a consequence the capacity of the virus to produce disease. There are, however, common features to the T cell response to viruses, which produce acute limited infection. This is true whether virus replication is restricted to a single site, for example, the respiratory tract (RT), CNS etc., or replication is in multiple sites throughout the body. In describing below the acute T cell response to virus infection, we employ acute virus infection of the RT as a convenient model to explore this process of virus infection and the host response. We divide the process into three phases: the induction (initiation) of the response, the expression of antiviral effector activity resulting in virus elimination, and the resolution of inflammation with restoration of tissue homeostasis

The evaluation of Education Maintenance Allowance Pilots: three years' evidence: a quantitative evaluation

This is the third report of the longitudinal quantitative evaluation of Education Maintenance Allowance (EMA) pilots and the first since the government announced that EMA is to be rolled out nationally from 2004. The evaluation was commissioned in 1999, by the Department for Education and Skills (DfES) from a consortium of research organisations, led by the Centre for Research in Social Policy (CRSP) and including the National Centre for Social Research, the Institute for Fiscal Studies (IFS) and the National Institute for Careers Education and Counselling (NICEC). The statistical evaluation design is a longitudinal cohort study involving large random sample surveys of young people (and their parents) in 10 EMA pilot areas and eleven control areas. Two cohorts of young people were selected from Child Benefit records. The first cohort of young people left compulsory schooling in the summer of 1999 and they, and their parents, were interviewed between October 1999 and April 2000 (Year 12 interview). A second interview was carried out with these young people between October 2000 and April 2001 (Year 13 interview). The second cohort left compulsory education the following summer of 2000 and young people, and their parents, were first interviewed between October 2000 and April 2001. The report uses both propensity score matching (PSM) and descriptive techniques, each of which brings their own particular strengths to the analysis

Fabrication and characterization of porous metal emitters for electrospray applications

Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Aeronautics and Astronautics, 2008.Includes bibliographical references (leaves 137-140).Electrospray thrusters provide small, precise thrust with high power efficiencies and variable specific impulses from less than 1000s to over 4000s. The miniaturization and clustering of many emitters together is essential to increase the thrust density of electrospray devices in order to increase their domain of applicability in space. Electrospray emitter arrays have many advantages over existing electric propulsion devices including much lower mass per unit thrust and much lower volume per unit thrust than conventional ion and hall devices. Additionally, with emitter clustering, the thrust density can meet and even exceed that of hall or ion thrusters. A method of micro-fabricating electrospray emitter arrays using modified conventional microfabrication technology is presented. The method is adaptable to different emitter materials and can be used to create ultra dense emitter arrays with microfabrication precision down to the micron level. One-dimensional linear emitter arrays with emitter separation as low as 500 [mu]m have been fabricated out of porous tungsten and preliminary tests show that dense two-dimensional emitter arrays can be fabricated with emitter separations down to 300[mu]m. Experimental research that was conducted to characterize emitter array performance is also presented. Time of flight mass spectrometry was used to identify the emitted ion species from the device, which showed that the device operates in the ion emission regime. Current was collected as a function of applied voltage to show that the devices were able to operate with emitted current levels of 0.5 - 1.5 [mu]A per emitter, even for dense arrays. Direct thrust measurements were performed to show that the amount of thrust attainable is on the order of 0.1 [mu]N per [mu]A of emitted current for extraction voltages of around 1900 V.(cont.) A normalization scheme was implemented to compare performance of emitter arrays of different density and initial results from a numerical model has shown that the emitters might be limited by fluid transport.by Robert S. Legge Jr.S.M

Measurements of total alkalinity and inorganic dissolved carbon in the Atlantic Ocean and adjacent Southern Ocean between 2008 and 2010

Water column dissolved inorganic carbon and total alkalinity were measured during five hydrographic sections in the Atlantic Ocean and Drake Passage. The work was funded through the Strategic Funding Initiative of the UK's Oceans2025 programme, which ran from 2007 to 2012. The aims of this programme were to establish the regional budgets of natural and anthropogenic carbon in the North Atlantic, the South Atlantic, and the Atlantic sector of the Southern Ocean, as well as the rates of change of these budgets. This paper describes in detail the dissolved inorganic carbon and total alkalinity data collected along east–west sections at 47° N to 60° N, 24.5° N, and 24° S in the Atlantic and across two Drake Passage sections. Other hydrographic and biogeochemical parameters were measured during these sections, and relevant standard operating procedures are mentioned here. Over 95% of dissolved inorganic carbon and total alkalinity samples taken during the 24.5° N, 24° S, and the Drake Passage sections were analysed onboard and subjected to a first-level quality control addressing technical and analytical issues. Samples taken along 47° N to 60° N were analysed and subjected to quality control back in the laboratory. Complete post-cruise second-level quality control was performed using cross-over analysis with historical data in the vicinity of measurements, and data were submitted to the CLIVAR and Carbon Hydrographic Data Office (CCHDO), the Carbon Dioxide Information Analysis Center (CDIAC) and and will be included in the Global Ocean Data Analyses Project, version 2 (GLODAP 2), the upcoming update of Key et al. (2004)

Quantification of the Frequency and Multiplicity of Infection of Respiratory- and Lymph Node–Resident Dendritic Cells During Influenza Virus Infection

Background: Previous studies have demonstrated that DC differentially regulate influenza A virus (IAV)–specific CD8 T cell responses in vivo during high and low dose IAV infections. Furthermore, in vitro infection of DC with IAV at low versus high multiplicities of infection (MOI) results in altered cytokine production and a reduced ability to prime naïve CD8 T cell responses. Flow cytometric detection of IAV proteins within DC, a commonly used method for detection of cellular IAV infection, does not distinguish between the direct infection of these cells or their uptake of viral proteins from dying epithelial cells. Methods/Principal Findings: We have developed a novel, sensitive, single-cell RT-PCR–based approach to assess the infection of respiratory DC (rDC) and lymph node (LN)-resident DC (LNDC) following high and low dose IAV infections. Our results show that, while a fraction of both rDC and LNDC contain viral mRNA following IAV infection, there is little correlation between the percentage of rDC containing viral mRNA and the initial IAV inoculum dose. Instead, increasing IAV inoculums correlate with augmented rDC MOI. Conclusion/Significance: Together, our results demonstrate a novel and sensitive method for the detection of direct IAV infection at the single-cell level and suggest that the previously described ability of DC to differentially regulate IAV-specific T cell responses during high and low dose IAV infections could relate to the MOI of rDC within the LN rather than th

Precision Southern Hemisphere pulsar VLBI astrometry: techniques and results for PSR J1559-4438

We describe a data reduction pipeline for VLBI astrometric observations of pulsars, implemented using the ParselTongue AIPS interface. The pipeline performs calibration (including ionosphere modeling), phase referencing with proper accounting of reference source structure, amplitude corrections for pulsar scintillation, and position fitting to yield the position, proper motion and parallax. The optimal data weighting scheme to minimize the total error budget of a parallax fit, and how this scheme varies with pulsar parameters such as flux density, is also investigated. The robustness of the techniques employed are demonstrated with the presentation of the first results from a two year astrometry program using the Australian Long Baseline Array (LBA). The parallax of PSR J1559-4438 is determined to be 0.384 +- 0.081 mas (1 sigma), resulting in a distance estimate of 2600 pc which is consistent with earlier DM and HI absorption estimates.Comment: 30 pages, 8 figures, submitted to Ap